RT1000 air intake tube

[Washy]

remove the rubber donuts and then install the uni filters...use the brp clamps not the ones that came with the uni filters....the brp ones are alot thinner...

size comparison

make sure you off set the clamps before installing...

use a bit of sicone spray or wd40 just to lube the boots to help for the install

then install your box and your good to go....now installing the box is a bit tricky....what you do is take a flat tool like a thin file or something....has to be long and then squish down the 2 filters and then install the box over top...it is tricky so just take your time....but it can be done...

and make sure you gut the out air box as well...no need for all that extra junk...

Stiff

Nice job. That is a GREAT idea.

 

[alaskadoo]

with the timbersled intake what happens with the sensor on the outer airbox?

 

[Summitric]

look on my pics on the previous page and you'll see where it is located to

 

[alaskadoo]

Is that it in the first pic? looped up in the upper left?

 

[Summitric]

Yup.......... That be it........... Has been there since 2006