RPM Issues with 2012 Pro - Help Please

Summiteer

Active VIP Member
Joined
Nov 8, 2006
Messages
5,883
Reaction score
3,508
Location
Whitecourt, Ab
Took my sled to the dealer for pre season check. TPS was out of whack causing engine to max out at about 90% so they told me. Could be your issue..155 and 163 geared the same? With this engine? Really? HMMMM. Who'da thunk it?
 

SCRUBZ

Active member
Joined
Nov 24, 2008
Messages
49
Reaction score
50
Location
kelowna
Very curious to know if you have found the problem with your sled. Im having the same issues but mine has slowly made its way to 7600 its driving me crazy! cant even do any testing unless i drive to the mountains.
 

cs5

Active VIP Member
Joined
Nov 5, 2010
Messages
362
Reaction score
468
Location
Edmonton
Very curious to know if you have found the problem with your sled. Im having the same issues but mine has slowly made its way to 7600 its driving me crazy! cant even do any testing unless i drive to the mountains.

A lot of stock springs broke and that would bring you into that 7600 rpm range, have a look.
 

SCRUBZ

Active member
Joined
Nov 24, 2008
Messages
49
Reaction score
50
Location
kelowna
I had a spring brake middle of last year dealer changed it under warranty and it has not really been the same since. I didnt notice how bad it was untill i got a guage bracket this year!
 

JCasino

Active member
Joined
Nov 24, 2011
Messages
100
Reaction score
50
Location
Nelson
Very curious to know if you have found the problem with your sled. Im having the same issues but mine has slowly made its way to 7600 its driving me crazy! cant even do any testing unless i drive to the mountains.

Nothing yet. I am only riding on Sundays this year due to family commitments so it might take a few weeks to get this sorted. I am removing my delrin from the secondary next and replacing my belt even though it only has 600 miles on it and looks new. If that fails, then into the shop to check the TPS.
 

polaris011

Active VIP Member
Joined
Nov 18, 2010
Messages
666
Reaction score
692
Location
olds ab
Check ur engine mounts as well ive been having the same kinda problems and I got into it and both bolts on the mag side of the bracket had backed out ImageUploadedByTapatalk1354593519.510623.jpg ImageUploadedByTapatalk1354593547.158872.jpg
Now I got some serious issues
 

JCasino

Active member
Joined
Nov 24, 2011
Messages
100
Reaction score
50
Location
Nelson
Had my top end replaced under warranty due to a nikasil failure and a cracked skirt and was able to pull 8250 today. Problem solved.
 
  • Like
Reactions: cs5
Top Bottom