2018 Axys 800 spark plug issues.

[Tchetek]

Adjusted to spec

 

[TDR]

Wires screw into the plug caps and coils.

 

[Tchetek]

Tested coils. Caps and wires,

All to spec except secondary coil reading of both coils.

Spec is 18 k +/- 15%. Mine round up to 13 k. But both are close to the same. 12.78 and 12.84k.

 

[Tchetek]

Stock wire is thin compared to the replacement.

 

[Tchetek]

So did tps, wires, and caps, sled isles better. got 2 days of puttering around with the kids then fouled the mag plug that was not fresh after repair. That’s better than it was!

Then had a no start issue after a wet travel day on the deck and missed a day doing parking lot trouble shooting. Changed relays. Got 2 days of riding. No plugs on the hill. But sled died on the deck when it got home. Then no spark again and soak plugs.

Sled doctor said wire harness. So it got a new take off from a 2020.

Sled ran 3 days no plugs mellow riding with the kids.

I’ll have to double check but I think I last had fresh bpr8es plugs in it went to the doctor.

I’ll pull one to check Colour

 

[06 Dragon]

Can tire carries NGK snowmobile racing spark plug cables. That is what I installed on pro Rmk already made up. Just have to cut to length.