Search results

I have a fully built hypex z bros front rest cr racing mcx turbo 10000 km needs track 174 make me a offer in sask. 306-963-7711

fuel doors. led lights.forced air furnace with glove / boot drying station. fans to move air around .

done thanks for the heads up

just thought i would mention the revy rcmp are still doing a great job. was in town for a 4 day trip from sask and i like to get up early for the trip home. we were leaving the motel at 430 and were stopped and checked to make sure truck trailer and sleds were ours ! was glad to see they are...

So found the problem.. On a couple of occasions i had the motor out ..once to repair the water pump .. And once for a mechanic to look at my repair and try and source the oil leak !! The return and breather lines that are on the front of the engine were mixed up !!! Swapped them back and the...

turbo shaft seals ? do you mean seals behind the mcx part behind the oil filter ? i didn't do the install..... but am learning lots as the years go buy just have not dealt with that yet . that provides oil to the turbo am i correct?

yes thats where the oil is coming out !

ill double check for kinked hoses and return lines i guess . and do a leak down test on all the cylinders again tomorrow thanks for the help !

yes stock !

no.. double checked level.. just keeps blowing it out till low oil level warning or code !

apex mcx 310 stock engine head shim blowing oil out breather at high rpm. did leak down test all 5% or less.. what else can i check ? any help would be appreciated..

Bought a used 174 and i want to mount it in my 07 apex stock tunnel.i should be able to use front mounting holes but will need to move rear brackets forward! Anyone able to help with those measurements ? Thanks in advance

thanks for the help.... called the dealer today and got all the parts i need and a picture how all the washers and bearing go back together..

the bearing right behind the secondary clutch on my apex mtn is gone.outer part of bearing still in housing.. housing still good.. nut on backside of shaft spun off but didnt wreck the threads... just have to changebearing ? am i missing a washer or something to go between that nut and the...