Recent content by the_bn

I marked tdc for both pistons on my clutch just to see if they were out, the marks are not even close to 180 degrees apart. It's a reman crank, I didn't think that would have happened. The last thing I checked.

I found my problem. My crank is out of phase, about 60 degrees.

Sorry that should have said no signs of coolant. I pulled the plug wires out and the inside part from the old wires are both stuck in the coil still. I will fix that and try it out.

Ya, I put in redone cylinders in. I pressure tested the engine and it holds 5psi

I replaced them when I replaced the base gasket, they looked ok. i'm going to pressure test the engine tonight

The reads look ok. The pto side plug is black, but signs of coolant.

Hi, I'm having problems with my 09 800 summit and looking for some help. I put a new crank and top end in it this fall. I had it out for a ride, It was running well. I made it 45 miles and it lost power and is now popping randomly at any engine speed. It's not coming out of the exhaust, a...