Recent content by Fast6seccamaro

My buddies just headed down today, had the whole place rented out. Was socked in and heavy snow for the last couple days, blue bird and deep yesterday and today. Ive been upto there half a dozen times and never dissapoints! I just get hammered in the boot room on my own bottle before dinner and...

What about us guys with the TKI belt drive already? Mountain cat inner chain case, template kit and a longer belt???

I emailed for more info, looking to order 8

No pics of salmon from today. Trail is good but the single track from the main trail has icy + rocky spots. Still made it up. 3'+ of fresh up top but starting to wind blow and creeks are still open

Stock Guage shows water temp.

We rode area 51 today. We drove and parked at km 21, road was in great condition. Rode up from there and the trail is decent buy the willows are terrible! Lol don't take a new shiny sled up there! Snow in the trees was real good, about 2' of softer snow. Snow was harder up top from the wind...

Nextech is in Sherwood park. He quoted my $100 per shock to install the spacers and new seals from what i remember. He said he could have them done in a couple days. I still need to get mine in there

full Jaws, proven power package! Jaws can is smaller and im guessing lighter!

TKI 2.33 ratio with stock 8 tooth drivers aND a 925cc BB. Works great, faster to rev rpm and easy to change belts if you break one.

If your jumping **** or just hard on equipment, I would go with the Ice Ace bomber rails. Heavier than stock but pretty sure they give you a guarantee not to bend! And a X brace or extra cross shafts are always extra insurance!

Rode Clemina today. Parked at the gravel pit around 4km. Very little gravel on the way up but don't be in a rush to head up the hill and let the sun soften up the snow first. The snow is getting a little thin on the top of the mountain peaks but had no problems. Good day for mid april

The rubbing part being normal or the 12 holes just to balance the clutch? I know my 13 rubs bad but no rivets there to do damage

Yeah, that sucks! Do all the new 2016 primaries require that much drilling for balancing?

Sounds like the dealer did really good for you, care to tell us what dealer??

My 13 has rubbed holes in the plastic near the primary and never bogged/stalled the engine. I think you have other problems!