Z120 retrofit with a Honda GX240

[Untouchable]

Has anyone put a Honda GX240 motor into a Z120?

 

[Caper11]

If it's anything like a mini z it's tight but doable.


Sent from my iPhone using Tapatalk

 

[slededjr]

Done the GX200 (6.5HP) not a GX240. GX200 was pretty straight forward. Everything transferred over from the stock engine to the GX200.
Just put a Kohler 7HP in the boys Cat120.

 

[gedakbx]

I put a powerfist (honda copy from princess auto) in my sons zr 120 bolted right in

 

[slededjr]

Pretty sure the 240 is quite a bit larger then the 200. It may not fit.

 

[Untouchable]

Yes the 240 is 2" longer and wider 3" higher. Have to pull a tape on the chassis when I get home. I can get a smoking deal on a 240 thats the only reason thinking about the 240.

 

[slededjr]

Ahh. 349 for 6.5HP at Canadian Tire. Installed one of those two years ago. Governor delete, mild porting, 18 Lb Valve Springs and you're ready. Sled flew.