XM Oil tank top fitting Need Help

xmsummit154

Active member
Joined
Jan 7, 2013
Messages
129
Reaction score
43
Location
Kindersley Sask
Hey guys I was getting the sled ready for the season and had the hood off and found a 1/4 inch fitting on top of the oil tank that just had a little piece of hose on the fitting and a clamp but it goes straight into the tank. I have looked everywhere but i cant find a hose that should connect to this fitting. Is there suppose to be one?? Is it a vent or what the heck??
 

Attachments

  • IMG_20141123_201236.jpg
    IMG_20141123_201236.jpg
    159.3 KB · Views: 256
  • IMG_20141123_203435.jpg
    IMG_20141123_203435.jpg
    140.2 KB · Views: 248

xmsummit154

Active member
Joined
Jan 7, 2013
Messages
129
Reaction score
43
Location
Kindersley Sask
Also thought I should mention I have owned this sled since new and it was only in the dealership once to get the 10hr service and fuel tank update done. Not sure if the mechanic that did the fuel tank update ripped it off or what happened but it does seem right to have a open fitting on the oil tank. Any help would be much appreciated Thanks.
 

Limbo

Active member
Joined
Apr 27, 2009
Messages
121
Reaction score
117
Location
Ft. Mac
Don't know off the top of my head but I'll take a look at my 13 and 14 tomorrow morning and report back
 

Limbo

Active member
Joined
Apr 27, 2009
Messages
121
Reaction score
117
Location
Ft. Mac
Looking at a 2014 that fitting is not on the oil tank anymore. It is on the 2013 and it is supposed to be capped by the rubber according to part #51 on the oil system parts diagram BRP #519000216.
 
Top Bottom