Turbo Viper Belt

06 Dragon

Active VIP Member
Joined
Nov 17, 2006
Messages
2,163
Reaction score
3,892
Location
Red Deer County
What are you folks running on on your turbo vipers for belts? I am still running the stock 8JP, I have been reading that the 8DN is better for the turbo application. I go through a couple or three of the stock 8JP belts a season.
 

06 Dragon

Active VIP Member
Joined
Nov 17, 2006
Messages
2,163
Reaction score
3,892
Location
Red Deer County
Belt For Turbo Yamaha

Which belt are you folks running and finding is working the best for the higher hp turbo yamaha sleds?
I see that the stock viper belt and sidewinder belt is the 8JP and the Nytro and Apex ran the 8DN. I know that some of you folks switched over to the 8DN on the vipers. Did anyone do this on the sidewinder? Is the 8DN a stronger belt then the 8JP? I know that the 8DN Apex / Nytro belt is less expensive.
 

jrusher

Active VIP Member
Joined
Jun 6, 2008
Messages
284
Reaction score
683
Location
Edmonton
Re: Belt For Turbo Yamaha

On my viper I switched to the nytro belt as it rides higher up in the secondary less belt dust and wear . Only have about 1700 km on it 10-12 pound boost
 

bendy

Active VIP Member
Joined
Oct 18, 2017
Messages
672
Reaction score
1,301
Location
Spirit River
Re: Belt For Turbo Yamaha

I have a 2014 Boost-it Viper with secondary shimmed to run the 8DN. Slightly cheaper belt too.
 

06 Dragon

Active VIP Member
Joined
Nov 17, 2006
Messages
2,163
Reaction score
3,892
Location
Red Deer County
Re: Belt For Turbo Yamaha

My viper is also a 2014 boost it viper 174 X 3". I am destroying a belt every 200mi or less. 8DN or 8JP. Still running the boost it clutching set up. Going to take it in and have the clutching checked for alignment and spec. I am getting tired of being thrown over the bars!!! Lol
 

06yamahaapex

Active VIP Member
Joined
Sep 10, 2007
Messages
551
Reaction score
907
Location
Stony Plain
Re: Belt For Turbo Yamaha

My viper is also a 2014 boost it viper 174 X 3". I am destroying a belt every 200mi or less. 8DN or 8JP. Still running the boost it clutching set up. Going to take it in and have the clutching checked for alignment and spec. I am getting tired of being thrown over the bars!!! Lol

did you change the gearing ? 2014 came geared high bc they were converted short track models. What springs, weights, and helix are you running ?
 

06 Dragon

Active VIP Member
Joined
Nov 17, 2006
Messages
2,163
Reaction score
3,892
Location
Red Deer County
Re: Belt For Turbo Yamaha

I know that the gearing has been changed, it has the boost it clutching set up. I am not sure exactly what it is. I will have to check it.
 

bendy

Active VIP Member
Joined
Oct 18, 2017
Messages
672
Reaction score
1,301
Location
Spirit River
Re: Belt For Turbo Yamaha

My Viper also is a 174 x 3". Its geared super low(don't know what gears). Never blown a belt in the 900 miles I've owned it. I do see a small amount of belt dust I have to clean up after every ride(since the sled is white). Its not terrible though. I do know what its like going over the bars though... I owned an M1100T lol. You must have a clutch/alignment issue?
 

06yamahaapex

Active VIP Member
Joined
Sep 10, 2007
Messages
551
Reaction score
907
Location
Stony Plain

06 Dragon

Active VIP Member
Joined
Nov 17, 2006
Messages
2,163
Reaction score
3,892
Location
Red Deer County
Re: Belt For Turbo Yamaha

This was designed for the old two stroke triples. Hauck was a big name back then. Not sure how it would handle 4 stroke with boost.
They actually list the magnum roller conversion kit for the apex. It should handle the power.
 

06 Dragon

Active VIP Member
Joined
Nov 17, 2006
Messages
2,163
Reaction score
3,892
Location
Red Deer County
Anyone run the thunder products clutch products? 911 primary clutch cover and or the secondary belt adjuster?
 
Top Bottom