Tether switch

[Wingwalker]

Anyone fitted a tether switch to there 98 powder special efi?

I have looked in the manual and can't find any specific wires to use.

Is my best bet to splice it into the kill switch harness or directly into the ignition wiring

 

[TROLLCAT]

use the wires on the key switch thats where arctic cat hooks it up

 

[firecat99]

You can have both run at once if you bought a cat one if you have aftermarket it still can be done just run one wire off the main to one wire off the tether the other tether wire to the ignition and plug the othe main from the ignition back to key, I forgot the colours haha but just leave it all open start the sled and start touching and see what works I just made it work on mine with a hiddin switch so good luck trying to steal my sled haha.