Swap 700 into a 600 XF

W O T

Active member
Joined
Jan 13, 2008
Messages
39
Reaction score
4
Location
S'toon Sk./ Lake Isle Alta.
I haven't posted in a long while. I picked up a 06' 600 XF with no engine, just a box of parts. I picked up a 700 from a F-cat. engine is in and I'm down to the last few connectors.

I have a problem figuring out where the cable linkage for the oil pump comes from. I hade to change the linkage on the oil pump but I don't know where it gets pulled from. The cable from the throttle is just a single so I took it to the throttle body. This whole thing has been like putting a puzzle together with out a picture for reference and a couple pieces missing. I am assuming the large hose fitting coming out of the left side of the oil pumps goes straight to the oil tank.
 

mountianguy

Active VIP Member
Joined
Apr 26, 2009
Messages
564
Reaction score
694
Location
stony plain
Sometimes parts book and or service manuals can help. You can find both at Country Cat.
The oil pump gets pulled from the throttle body with a adjustable connector (short rod) #10

Large
 
Top Bottom