zeebs
Active VIP Member
Ok maybe Im missing something here but I went to align my front end on my 800 and instead of running a string along side the wheels I wrapped it all the way around starting and ending at the hitch with jackstands about 2 feet in front of the quad on each side. about 12.5 inches off the ground so Im in the center of the wheel. Now when I go to move my jackstands to get the sting to touch both the tire side walls on the front and back of the rear tire I end up with the string touching the front tire before it touches the front sidewall of the rear tire. I have the handlebars center and lock in place. I also see people coming up with a number on the front like an inch away on the front and inch and an eighth on the back side of the rim. I have absolutly no where close to that if I could get it to touch.
If someone could shed some light on this project for me that would be good. Thanks
If someone could shed some light on this project for me that would be good. Thanks