Snorkeled 660 running problems

[Little10]

Hey guys and gals, I need help again. I put a snorkel on my quad and now it won't run. If I let it sit awhile it will idle on choke for a couple minutes then die. It won't start again unless I let it sit or spray a little starting fluid down its throat. I know I need to jet it but I thought it would still run, just a bit sluggish.

 

[dean_jimmy96]

humm i am thinking the air to fuel mix is messed up

yuppers you need to rejet that puppy to make her run right

 

[munhoez]

what other mods do u have installed? Did you set your mixture screw back to where u found it? Is your idle set correctly? Alot of bends in piping or no?

 

[Little10]

No other mods, didn't mess with the mixture screw, the piping is as strait as i could keep it. I took the carb off to check for trash, didn't find any. I figured since I had it apart I would put a shim under the stock needle (no adjustment slots). Its running now but alittle fat on the bottom end. Do ya'll think i should still jet it?

 

[munhoez]

ya you might have to jet. :d