Ski alignment?

[jockdoc]

My 2014 Pro has been great, but I have found it a tiny bit challenging to steer & roll onto its edge. Anyway, it occurred to me that the skis may be a bit "off" or turned out/in. Anyway, turns out they are turned out about 3/4", meaning the front of the skis, C to C, is wider than by 3/4" than the back of the skis. I am hoping that someone on here has a suggestion that would work for boondocking. Thanks!!

 

[honda450]

My assault and pro are toed in about 1/4 inch and both work good

 

[007sevens]

toed out 3/8"-1/2"

 

[scrfce]

Move the spacers to the outside of the spindle to narrow the stance. You can also disconnect your sway bars to make things a little easier

 

[geo]

If you have the rear shock set to your weight (owners manual), try about an inch more preload on the middle shock. Might be what you are looking for.

 

[jockdoc]

OK, ill try a few of your suggestions. Thanks!

 

[DaltonW]

Move the spacers to the INside of the spindle to narrow the stance. You can also disconnect your sway bars to make things a little easier

Corrected

 

[scrfce]

Corrected

Yes ur right. Thats mine. Just confusion in msg relay