Rebuild CV joints

[Peacepipe]

Not sure if this is the right forum but here goes. 2015 Kawa 800 Teryx SxS already replaced 2 axles a front and rear. Ok Got some protectors ordered. Now that I have 2 axles is there a place that will rebuild the CV joints that are NFG and boot assembly? Figured good spares and don't have the tools to fix myself. Any suggestions welcomed and thanks.

 

[neilsleder]

It takes very basic tools to rebuild them your self. Pretty much a vise, hammer, beer, lots of rags paper towel, beer, cv boot pliers (depending on the style of clamp you might not even need them), and more beer and that's it.


Sent from my iPhone using Tapatalk

 

[neilsleder]

Oh and maybe snap ring pliers and needle nose pliers.


Sent from my iPhone using Tapatalk

 

[papajake]

Wear mechanics gloves hard on the hands and knuckles and grease everywhere

 

[arff]

Wear mechanics gloves hard on the hands and knuckles and grease everywhere

Muffin. Come on.

Blood and great mix well I know from experience

 

[papajake]

Muffin my arse blood all over the place and only duct tape to stop the bleeding been there done that many times working on my shyt

 

[tex78]

Muffin my arse blood all over the place and only duct tape to stop the bleeding been there done that many times working on my shyt

Azz wipe and black tape is what real mechanics use, just so ya know

 

[rzrgade]

You may be cheaper to just buy aftermarket axles , just over 200$ ish ...

 

[imdoo'n]

Just a heads up don't be buying double precision junk, no warranty, about as strong as limp spaghetti, I have broken 4 out if 5 axles , complete junk, Anything else, slasher is cheaper and a warranty to boot.


Sent from my iPhone using Tapatalk

 

[rzrgade]

Mine have been great ... Depends on the rider.. Some can break everything ! Some just don't maintain / wash and check boots ..Double precision make a good axle for the $$$
Just depends what you want to spend , then how well you know how to push them ....

 

[imdoo'n]

1 out of five may survive, ask Brent

 

[rzrgade]

Azz wipe and black tape is what real mechanics use, just so ya know

Builders , same thing .....lollol

 

[imdoo'n]

they last a long time if ya never ride it.

 

[imdoo'n]

even longer if ya don't ride it

 

[imdoo'n]

throw a cv joint into the atv, or a better axle.

 

[rzrgade]

Throw bigger tires on it , pin it ...
hope for the best.....
ride 10 mins .... Fix for 50 !

Should work ......

 

[imdoo'n]

you need a better ride bud.

I could put a schedule together for you if you'd like?


lo, looks like its time for me to go to work!

 

[imdoo'n]

well lets get this into high gear, must be riding time

 

[imdoo'n]

you better give brent a call!

 

[imdoo'n]

ups