pullin my hair out!!!

BIG DAWG

Active VIP Member
Joined
May 3, 2010
Messages
479
Reaction score
370
Location
Delburne Ab
just rebuilt top end in 05 scrambler 500 back together now but will not idle thought carb so pulled apart and sprayed through jets thouroghly with carb cleaner( was thinkin pilot jet plugged) made no difference then removed intake boot and inspected it looks fine apply light layer of silicone between manifold -engine and reinstall still not idleing if you touch the throttle it seems to run fine but as soon as you let go of throttle (just above idle) it dies
any input would be greatly appreciated
 

TylerG

Super Mod Geek
Administrator
Moderator
Joined
Nov 7, 2006
Messages
30,544
Reaction score
27,814
Location
Parkland County
We had an 04 that was very similar, was always playing with the throttle cable to get it to idle.... then it would idle too high, turn it down, stall out.... was a never ending battle.
 

Bnorth

Active VIP Member
Joined
Dec 18, 2010
Messages
10,554
Reaction score
20,169
Location
Salmon Arm
Have a buddy with a similar issue, rebuilt the carb about 4 times and no change, then he tried a carb off another machine and it ran great.
 

Riverjet

Active VIP Member
Joined
Dec 24, 2008
Messages
1,703
Reaction score
1,388
Location
Prince George
Service the carb properly. Spraying carb cleaner through it doesn't do it.
 
Top Bottom