proclimb trenching

guy3_3

Member
Joined
Dec 6, 2011
Messages
5
Reaction score
16
Location
Kindersley
I have a 2012 153" sno-pro proclimb. It seems to trench really bad in deep snow. I am thinking of putting a 2.6" or 3" track on it to try and help stop the trenching. Does anybody have any solutions to stop the trenching? Which aftermarket track seems to be working best for everyone?
 

geordiep

Active member
Joined
Apr 25, 2007
Messages
131
Reaction score
121
Location
Calgary
I had major trenching issues the first year on my 2012 ProClimb too.

Here is what I did to fix it:

1. 2013 skid spec:
Drilled front mount to 2013 spec (3/4" drop on front mount) and dropped rear mount to bottom. This is KEY. It is easy/free mod.
Download drilling template here:
http://db.tt/mk8wnAez

Write up with pics:
SnoWest Snowmobile Forum - View Single Post - template for drilling new suspension mounts

Highly suggest installing Anit-stab kit from BDX: RecreationSupply.ca p/n:bdx50019 )

2. Suspension setup (stock setup from factory)
I have tried every setup and found stock to have the best all-round setup.
front skis: 70-90 depending on terrain & mood that day
limiter: middle hole
pre-load : 1/4 turn past slack (2-3 threads showing)
rear shock: 145 (depends on your weight)

3. Camo Extreme 2.5"

The track is amazing and superior to the PowerClaw (IMHO). ($450 upgrade after selling PowerClaw on kijiji.) It floats much better. You can actually control descents. If you go 3" you will need 7t drivers

Awesome write-up on Track Swapping:
Track Swap Step-by-Step by Johnmaster - HCS Snowmobile Forums


After these mods I could actually crawl through 3ft pow without the fear of trenching under throttle. It was amazing how much this helped.
 

Attachments

  • DSC01689.JPG
    DSC01689.JPG
    52.1 KB · Views: 432
  • 2012-09-15 20.37.06-resize.jpg
    2012-09-15 20.37.06-resize.jpg
    217.1 KB · Views: 451
  • 2012-09-15 19.33.32-resize.jpg
    2012-09-15 19.33.32-resize.jpg
    146.6 KB · Views: 441
  • 2012-09-15 20.37.16-resize.jpg
    2012-09-15 20.37.16-resize.jpg
    132.5 KB · Views: 424

Taminator

Active VIP Member
Joined
Nov 8, 2008
Messages
2,589
Reaction score
1,265
Location
Radium Hot Springs, BC
The 2012's seemed to have a bit of a trenching issue...we had a few in our group that experienced the same thing. However, the 2013's are not trenchers at all. I like the Powder Claw track myself - if you can make some adjustments closer to the '13's improvements you will notice some difference. My hubby is much heavier than me and his 12 trenched pretty good...he floats on his 13, same sled, different year. The small but major improvements they made sure added up to a much nicer ride. Sounds like geordiep has accomplished it with his. :)
 

snoqueen

Active VIP Member
Joined
Dec 21, 2008
Messages
499
Reaction score
505
Location
Prince George, B.C.
I have a 12, my hubby a 13....noticeable difference in the way these two sleds handled in regards to flotation and maneuverability! So...we dropped the skid in mine to 13 specs, added a 2.5 CE and a anti-stab kit. What an absolute difference this upgrade has made, I definitely recommend it for sure.
 

Shredder

Active VIP Member
Joined
Dec 4, 2006
Messages
2,620
Reaction score
2,879
Location
Grande Cache AB
I never rode my '12 with the PC track as I had a CamoX 2.5 on it when I picked it up. But remounting the skid in the '13 location and setting up the skid frame makes a huge difference from just jumping on a sled with a dealer basic PDI set-up. I run 70 PSI on the clutch side and around 66 PSI on the exhaust side up front. Also ditched the Float2 in the skid for a ZeroPro coilover set-up.
 
Top Bottom