MCX 180/190 KIT won't run???

[08TNytro40]

Hi, I have a MCX 180 nytro that will not run with the MCX box plugged in. When I plug in the stock wiring it starts and runs no issues. When the box is plugged in it rolls over but does not fire the injectors. I sent the box back to PG and they sent me a 190 box, I plugged it in today and no go??? So wondering if anyone has any ideas to help. It does not throw any codes and shows no codes in the diagnostic menu. Thanks in advance, my first post but have been reading on here for few years

 

[vip]

there is a red wire in the harness that fires your injectors check for power. it also branches off and runs your feul pump

 

[sled obsessed]

I would probably just sell that old junk and spool up a new sled!

 

[ROBERTSONYAMAHA]

Did you solve your issue yet? -Cody

 

[08TNytro40]

Yeah I did, it was a bad plug. The one with two wires in it that goes back to the vac/boost lines on the turbo, not sure what that little valve is called.