looney tuned slip on need info!

redneckoutty

Member
Joined
Jan 31, 2011
Messages
10
Reaction score
0
Location
Barrhead AB
I have a 2011 outlander 800 can I run a slip on exhaust without an optimizer? Is it safe to run it without one? I've heard it will cause it to run lean and cause catastrophic engine failure. Thanks.
 

DaveB

Active VIP Member
Joined
Sep 18, 2007
Messages
5,893
Reaction score
16,688
Location
Red Deer area
You should run a tuner. Those "optimizers" are crap. Run a PowerCommander 3 or 5 with a proper tune. These guys in Edmonton have a chassis dyno and the know-how to make it perfect:
 
Last edited:

DaveB

Active VIP Member
Joined
Sep 18, 2007
Messages
5,893
Reaction score
16,688
Location
Red Deer area
The EFI will not adjust for the pipe or any changes to the intake (snorkles, free-flow filter, high-flow intake). The 06 to 08's were OK with a slip-on pipe as they ran a bit fatter. The 09 and newer will run VERY lean in the low and mid range, slightly lean in the high end, and will be noticably hotter when you add a slip-on pipe. Lot's of guys do it...but it's not a good idea.
 

KWIK RACING INC.

Active VIP Member
Joined
Nov 13, 2010
Messages
1,825
Reaction score
1,871
Location
calgary, alberta
yes i agree with dave. he is 100% correct. and if you want to do some tuning, go see kevin or quinn at get torqed. believe me!:wtg:
 
Top Bottom