Looking for someone to install wrap

snowseeker

Active VIP Member
Joined
Dec 12, 2007
Messages
1,379
Reaction score
569
Location
Fort Saskatchewan
Ok guys have had lots of wraps installed and my buddy that does it is away and when he gets back his away on work shift.
so I am looking for someone that has done wraps before and is good at it and will pay them cash to install mine. I have a heated garage in fort Saskatchewan.
looking to get it done ASAP. It is an arctic fx wrap going on a skidoo xm full wrap tunnel as well.
thanks in advance for any help.
Pm me or text me 780-699-9118

Darren
 

1100

Active VIP Member
Joined
Sep 7, 2008
Messages
1,198
Reaction score
1,631
Location
sangudo
I just seen your one of your sleds and it had a wrap on it already. Better just go for it. What's the worst that could happen.
 

Warhawk

Active VIP Member
Joined
Dec 6, 2009
Messages
441
Reaction score
141
Location
White City
There not that bad you just need to follow 3 simple rules.
1....BEER(lots of it)
2..........................patience (lots of it)
3......................................................time (lots of it)
this took 10 hours
 

Attachments

  • 2014-11-30 13.37.53.jpg
    2014-11-30 13.37.53.jpg
    193.9 KB · Views: 182

ajb1205

Active member
Joined
Feb 7, 2011
Messages
78
Reaction score
61
Location
Lloydminster
Too bad u werent closer...I have installed dozens of wraps. Biggest thing is get it clean and warm...and just take your time. A heat gun comes in handy too.
 

snowseeker

Active VIP Member
Joined
Dec 12, 2007
Messages
1,379
Reaction score
569
Location
Fort Saskatchewan
There not that bad you just need to follow 3 simple rules.
1....BEER(lots of it)
2..........................patience (lots of it)
3......................................................time (lots of it)
this took 10 hours
that wrap was my design on my pro but with purple, then I did it in yellow on a doo. It's a sick wrap!
looks awesome. It's on there site.
 

Attachments

  • image.jpg
    image.jpg
    40.6 KB · Views: 136
  • image.jpg
    image.jpg
    221.5 KB · Views: 136
Last edited:

Shredder

Active VIP Member
Joined
Dec 4, 2006
Messages
2,622
Reaction score
2,881
Location
Grande Cache AB
We'll Doo it in the trailer the night we get to McBride. Should be able to slap it on in 20 minutes or so. No biggie if it's not perfect.....:beer:
 

TylerG

Super Mod Geek
Administrator
Moderator
Joined
Nov 7, 2006
Messages
30,597
Reaction score
27,876
Location
Parkland County
Plio7 hired someone last year to install his wrap on his Proclimb, maybe PM him Darren and see if he's still got that guys contact information.
 

Bogger

Bogger of the GBCA
Joined
Feb 21, 2007
Messages
24,413
Reaction score
18,488
Location
Down by the Bay
I was going to hire mine out but decided fawk it.... It was remarkably easy, I bought some rapid-tac from a sign shop here in Edmonton and you have 90 seconds to position it then just work on getting the water/air bubbles out, hair dryer works well for any rounded parts, little heat and it flexes nice...

AND... If you happen to put one on wrong you can pull it back off and it will still re-install with no issues, I had to pull one of my sections off after about 5 minutes, I re-wiped down the area, re-wet the decal and she went on no problem. Everything seems to be holding tight.
 
Top Bottom