Light pipes

[fredw]

Looking around for a lighter pipe for the etec, stock cerramic etec pipe and skin is close to 12 lbs

talked wit rich from dyno port he is saying 8.2 lbs ceramic coated, has any one else seen lighter? With a good reputation for not breaking

 

[neilsleder]

Spi maybe. Give Deano a call on here he sells them so he might know the weights.

 

[allrevsrule]

If you find one Fred let me know I would like a light one for my XP P-Tec maybe someone can make a titanium one like the dirt bikes use !

 

[Bnorth]

I think SLP is pretty proud of how much weight theirs drops.

 

[Destroyer]

The Top secret shop has a new side delivery pipe. It uses the same concept as the old doo 583 and 670 pipes. The end is capped off and the muffler exhausts from the bottom of the pipe about 10" back. Saves close to 20lbs over the stock exhaust system and adds 8hp. No fuel controller needed.

Call brandon at TSS 1-250-833-7501

 

[Bnorth]

The Top secret shop has a new side delivery pipe. It uses the same concept as the old doo 583 and 670 pipes. The end is capped off and the muffler exhausts from the bottom of the pipe about 10" back. Saves close to 20lbs over the stock exhaust system and adds 8hp. No fuel controller needed.

Call brandon at TSS 1-250-833-7501

Are you a salesman for TSS now? Still waiting on the benefits of the side delivery and a dyno sheet.

 

[neilsleder]

Are you a salesman for TSS now? Still waiting on the benefits of the side delivery and a dyno sheet.

Was thinking the same. It must be the can and pipe combo that saves that much weight ?!?!

 

[maxwell]

Was thinking the same. It must be the can and pipe combo that saves that much weight ?!?!

Ya they also have a y pipe


Sent from my iPhone using Tapatalk -

 

[Dmf]

Ya they also have a y pipe


Sent from my iPhone using Tapatalk -

I believe its bikemans y-pipe

 

[Destroyer]

I'm good friends with the Micku's so I spread the word about their stuff, he said he was looking for pipe options so I figured I'd throw it out there. I know the new pipe isn't up on their website yet. From what I've seen the TSS stuff works awesome. They are working on dyno numbers, but are super busy from all the shows. It's a pipe can combo. You use your stock y-pipe. I Hope you all are alright with me posting their stuff. I notice other people are die hard dynoport, SPI, or SLP etc. TSS doesn't get enough recognition online. They are still a small company in comparison to most, they are on the rise though big time.

 

[oler1234]

Slps whole setup was quit a bit lighter then stock, don't have any numbers but they list them on there website

 

[Bnorth]

I'm good friends with the Micku's so I spread the word about their stuff, he said he was looking for pipe options so I figured I'd throw it out there. I know the new pipe isn't up on their website yet. From what I've seen the TSS stuff works awesome. They are working on dyno numbers, but are super busy from all the shows. It's a pipe can combo. You use your stock y-pipe. I Hope you all are alright with me posting their stuff. I notice other people are die hard dynoport, SPI, or SLP etc. TSS doesn't get enough recognition online. They are still a small company in comparison to most, they are on the rise though big time.

I get that, just the way you present it comes across as almost advertising. On many sites you need to be a paid vendor to make the kind of posts I've seen from you on here, DT, and SW. I like seeing a somewhat local company getting busy though.

Having a hard time believing an 8hp gain when they don't have dyno graph and not one pipe yet has made any power on the etec. I would also like to hear about the benefits of the bottom dump if there are any besides being trick.

 

[Destroyer]

I've always been told I'm a natural born salesman lol. I'm a consumer too. Just posting stuff I see and like. I'll try and keep the salesman personality to a minimum.

 

[fredw]

Some info on the slp pipe but does not show individual weight of pipe...

And Yes a titanium specfic pipe would be a real sweet upgrade,for us turbo guys....


Put the “E” in E-tec with this EXCITING new pipe from SLP. It provides an additional 7 horsepower and reduces weight by 16.1 pounds on 2014 models (14 pounds on 2011-13 models). This results in quicker acceleration with more top-end speed. Whether you are racing your buddies on the lake, busting through some spectacular powder or climbing to the heavens, this pipe kit is sure to satisfy. As an added bonus this pipe set is compatible with the stock fuel injection system of this engine so there is no additional fueling required. This pipe set comes standard with ceramic coating on the pipe, y-pipe and silencer. Y-pipe to cylinder gaskets included.

 

[snopro59]

I've got a ceramic coated Bikeman pipe for $250 if anyone interested.

 

[fredw]

Weight of the pipe

 

[summit1974]

I've got a ceramic coated Bikeman pipe for $250 if anyone interested.

why you selling?

 

[snopro59]

why you selling?

I am just staying stock. I ride both prairie and mtn. Bmp says this is a high elevation pipe.


Sent from my iPhone using

 

[fredw]

Might of found someone to build them out of titanium, won't be cheap but should be five less pounds for sure, wish I owned a machine shop

 

[neilsleder]

Might of found someone to build them out of titanium, won't be cheap but should be five less pounds for sure, wish I owned a machine shop

That's cool! Won't be cheap for sure titanium is not an easy thing to work with.