Installing T3 x 163 track on 165 G4 - Inquiry

venom

Active VIP Member
Joined
Aug 27, 2008
Messages
214
Reaction score
246
Location
ft mac,AB
I saw the gen4 alpha sled that someone built. Wonder what they did for a driver/ shaft mod to run that setup. Push the driver's together, I doubt it. probably can't get them close enough. Probably custom drivers or shaft. Have to look at mine when I get home...Curious now.
Definitely not stock drivers. Had a look at mine and could make them work. Slight modification to the inside of the driver to allow them to set tight to each other. No matter anyhow still doesn't allow ya to run the alpha track without outside windows and clips.
More pics posted of the alphadoo.
81c77e8f40a962dd8181555681c5df39.jpg
 

venom

Active VIP Member
Joined
Aug 27, 2008
Messages
214
Reaction score
246
Location
ft mac,AB
Well I'm gonna give this a try. Might b a piece of garbage idk. Bought it at the sled show. Made sure I voiced my opinion at brp before i left as well.
7f9ca373afe10ed3ff326cd1fde71ca0.jpg
 
Last edited:

Cableguy

Active VIP Member
Joined
Dec 16, 2014
Messages
2,095
Reaction score
4,991
Location
Okanagan
i measured the outside width of the sliders on a twin rail ctec and a g4
they are the same
 

venom

Active VIP Member
Joined
Aug 27, 2008
Messages
214
Reaction score
246
Location
ft mac,AB
Can I get a play by play on the showdown at Brp booth? Sounds like some chit went down at the show!
Not much of a showdown. questioned him on their knowledge of the track issues. Of course they're in denial about it. Heard of it but didn't think it was an issue. Asked me if I submitted a warranty claim, and took my info. I Submitted a claim last spring and got denied. This is my last brp until that issue is resolved.
 

Bnorth

Active VIP Member
Joined
Dec 18, 2010
Messages
10,714
Reaction score
20,623
Location
Salmon Arm
I've heard good reviews on the composit 2.6 so I hope the 3"works well too. What was the price in Kanuckistani Pesos?
 

Caper11

Active VIP Member
Joined
Oct 28, 2007
Messages
9,583
Reaction score
18,773
Location
Edson,Alberta
Thats a decent price track. I look forward to your review. When you get it, can you measure the actual lug height.
 

venom

Active VIP Member
Joined
Aug 27, 2008
Messages
214
Reaction score
246
Location
ft mac,AB
Also just noticed that I posted a pic of the wrong track. Well same track but the r has centre porting
5e193f1a3243f3bbbb2d697f51161f38.jpg
 

zenk

Active VIP Member
Joined
Nov 18, 2010
Messages
324
Reaction score
231
Location
red deer
the factory doo tracks are $hit. it seems like everyone is having the same issues.
i am not a hardcore rider by any means and i have 3 or 4 cracked paddles on my 154 3".
the 850 tracks were just built to light and $hitty in my opinion.
 

venom

Active VIP Member
Joined
Aug 27, 2008
Messages
214
Reaction score
246
Location
ft mac,AB
Not sure the weight of the stock track. Haven't had a chance to take it off.
 
Top Bottom