- Admin
- #1
Over the next few days I am snorkeling my 07-800 Renegade. I will post pictures and what parts I used. Please do not repond to this post untill I have all the instructions completed.
STEP 1: Take the original parts off that attach to the clutch housing
a) Remove plastic cover in front wheel well on same side as clutch where front breather is attached to.
b) Remove front clutch housing breather hose clamps, hose and upper plastic intake assembly.
c) Remove rear clutch housing vent clamps, hose and plastic vent assembly.
d) Inspect rubber light hose and if checked or cracked it will require replacement.
STEP 1: Take the original parts off that attach to the clutch housing
a) Remove plastic cover in front wheel well on same side as clutch where front breather is attached to.
b) Remove front clutch housing breather hose clamps, hose and upper plastic intake assembly.
c) Remove rear clutch housing vent clamps, hose and plastic vent assembly.
d) Inspect rubber light hose and if checked or cracked it will require replacement.
Attachments
Last edited:
