Hot rods, project vehicles & summer toys

kyle019

Active VIP Member
Joined
Dec 20, 2010
Messages
242
Reaction score
209
Location
Vermilion, AB
Since pretty much everyone is in to hot rods and horsepower, this is a thread to show off your summer rides. From project vehicles to show vehicles and classics, post up some detailed pics of your summer hot rods!
 

kyle019

Active VIP Member
Joined
Dec 20, 2010
Messages
242
Reaction score
209
Location
Vermilion, AB
Heres a pic of my summer toy, I built this truck from the ground up with my dad in 2009 for my 16th birthday and it has also changed a lot over the years since being back on the road. It's a '92 gmc sierra with 143,000 km's, 350 5.7L motor with some go fast parts ;) the truck was torn down again last fall (sept. 2012) to go under the knife for air ride suspension, I did all the work myself minus the welding cuz I suck at welding haha. Anyways, it takes a lot of fab work to make a truck lay frame! Just finished the air suspension early this summer and this is how she looks..

A82EC997-09AA-46C0-A318-176FF8AC8FFA-465-000000C82EBF787E_zps284ee648.jpg
 

Clode

Active VIP Member
Joined
Jan 8, 2012
Messages
29,223
Reaction score
45,545
Location
BC
1989 Mustang GT that I purchased 5 years ago, it was completely stock down to the exhaust. It needed a lot of basic maintenance, so that was done first. I now sports a 61mm turbo, Anderson PMS controls fuel etc, a 3:55 rear gear, and the list goes on. It sports original paint so that is still on the list to be redone. This winter it will receive suspension and brake upgrades.
 

Attachments

  • DSC00991.jpg
    DSC00991.jpg
    112 KB · Views: 543

PS94

Active VIP Member
Joined
Feb 11, 2009
Messages
358
Reaction score
194
Location
Grande Prairie
1994 Ford Ranger Splash, started life as a 4 cyl, 5 speed, now has a 347ci smallblock, WC T5 trans, lowered, 17" rims, shaved, 398/402 on the dyno at the wheels.
2003 Mercedes Benz SL55 AMG, Hard Top Convertible.. upgraded pulleys, Lorisner Body Kit, 20" Wheels..
Pics when I get home
 

oler1234

Active VIP Member
Joined
Nov 20, 2008
Messages
3,606
Reaction score
6,050
Location
Calgary, AB & Golden, BC
1968 Beaumont. I have owned this thing for 10 yrs now, since 18. Right now it sports a hustlers +500hp 427 big block with a 4k stall and t400. Got a Dana 60 out back from strange. Suspension wise I have it setup for road racing with Howe racing equipment and qa1 coil overs all around. Big sway bars. Bassett racing wheels. Hydroboost, etc. And yes she gets driven father than macs, sees trips out to golden/radium. This winter I will be slamming in a 502 big block with a BW turbo of some size at 7-10lbs. Goal would be 6/650 rwhp and a torque curve even a diesel would be jealous of!

image.jpg
image.jpg
 
Last edited:

gotboost

Active VIP Member
Joined
Oct 18, 2008
Messages
2,762
Reaction score
3,645
Location
Northern AB
I have a couple an 1968 Nova SS 496 stroker big block chevy with an 871 blower over 900hp 1970 chevelle ss 468 big block and an 1971 chev short box frame off rotisserie built by RAW HOTRODS in kelowna has an 383 stroker 450 hp
 

Attachments

  • truck1.jpg
    truck1.jpg
    146.8 KB · Views: 483
  • truck2.jpg
    truck2.jpg
    152.6 KB · Views: 482
  • truck3.jpg
    truck3.jpg
    124.4 KB · Views: 482
  • truck4.jpg
    truck4.jpg
    128 KB · Views: 483
  • nova5.jpg
    nova5.jpg
    150 KB · Views: 484

KWIK RACING INC.

Active VIP Member
Joined
Nov 13, 2010
Messages
1,825
Reaction score
1,871
Location
calgary, alberta
Besides my Quad addiction and racing them which comes from being in drag racing for 30 + years.. here is my other two toys besides my renegade.... the corvette has crappy pics cause its been in my cousins body shop for a bunch of years now.. owned this car since 1979.. its a 74 with a 80 front end clip, 80 rear end clip and greenwood turbo hood.. stock interior with a 462 cu in roller motor... Motor made 531 hp at the flywheel and 776 hp with the NOS 250 hp jets.. rear is IRS still with a strange spool and stange stubby 31 spline axles.. 3.90 gears and turbo 400 manual valve body.. won 7 world of wheels in a row and two outstanding sports car awards at the world of wheels Calgary... last show I was in was 1988... car has seen the 1/4 mile track many times and runs 12.5's and 11.4's with NOS... my faster project was a 1982 S 10 truck.. 406 cu in small block and made 515 hp at the flywheel.. I run NOS at 250 shot in it two.. truck is fully street legal and tubbed.. running a 350 turbo automatic with a tranny brake and MSD 2 step.. 4500 stall.... and 4.56 gears.. NHRA cert. to 9.99.... truck has run 11.74 with out the NOS steady and fastest has been a 10.551 at 126mph in the 1/4 .. my 60 foot with NOS is 1.41 sec and without 1.55 sec... the truck pics are good ones but the vette pics are pictures taken from blowups from Kodiak paper... its been in the body shop so long I don't have any digital pics of it cause its not done yet.. those 2 pics are before the new face lift now... this time which includes a new paint job, rims, all glass weather stripping and most of the interior for the second time now....lol
 

Attachments

  • 1974 Corvette Stingray Coupe 002.jpg
    1974 Corvette Stingray Coupe 002.jpg
    125.2 KB · Views: 434
  • 1974 Corvette Stingray Coupe 005.jpg
    1974 Corvette Stingray Coupe 005.jpg
    127.2 KB · Views: 422
  • 82 S 10 001.JPG
    82 S 10 001.JPG
    77.3 KB · Views: 425
  • 82 S 10 005.JPG
    82 S 10 005.JPG
    74.5 KB · Views: 413
  • 82 S 10 006.JPG
    82 S 10 006.JPG
    77.7 KB · Views: 415
  • 82 S 10 007.JPG
    82 S 10 007.JPG
    44.1 KB · Views: 424
  • s10 pics with chip foose photo 007.jpg
    s10 pics with chip foose photo 007.jpg
    176.5 KB · Views: 423
  • s10 pics with chip foose photo 003.jpg
    s10 pics with chip foose photo 003.jpg
    115.6 KB · Views: 419
  • s10 pics with chip foose photo 006.jpg
    s10 pics with chip foose photo 006.jpg
    105.1 KB · Views: 420
Last edited:
Top Bottom