Dec 26, 2012 #1 Syncustom Active VIP Member Joined Jan 30, 2012 Messages 154 Reaction score 15 Location Edmonton AB I just swapped my primary weights and to move super nice and one is kinda sticky? Is this bad or normal? The rollers are all fine.
I just swapped my primary weights and to move super nice and one is kinda sticky? Is this bad or normal? The rollers are all fine.
Dec 27, 2012 #2 neilsleder Active VIP Member Joined Oct 18, 2009 Messages 9,618 Reaction score 17,001 Location Leduc Alberta Make sure you have your set screws in the weight seated in the dimple on the bolt, and not off to one side making the weight rub. And it could be the orings that are holding it
Make sure you have your set screws in the weight seated in the dimple on the bolt, and not off to one side making the weight rub. And it could be the orings that are holding it
Dec 27, 2012 #3 Weirboondocking Active VIP Member Joined Nov 16, 2012 Messages 474 Reaction score 524 Location fernie bc also make sure that there is a o-ring on both sides of the bolt and that you didn't over tighten the sticky one
also make sure that there is a o-ring on both sides of the bolt and that you didn't over tighten the sticky one