clutch kit weights

[fastidle]

In my 07 700 kinquad I have 22 gram weights for my clutch in now and was wondering if I should go to the 18 gram ones, which ones have the best results for power. I also have the yellow secondary spring, is green the better one to go for the power?

 

[QMAO]

Here is a helpfull mod if you are looking for more bottom end power http://www.nyrocatv.com/techtip.cgi?viewcat=11&viewtopic=340.

It does take about 6-8 KPH away from the top end speed.And that can be fixed with this mod...Nyroc's ATV info website.

I hope this is what you need,,,good luck

 

[Bandit]

I just did the coop mod on my 750, went with 1.5mm shim, and with the 27" xtr's it great. Got all the bottem end back, and although I lost some top end, with the larger tires I can still do 90-95 Km/hr.

 

[fastidle]

Ya that looks awesome, Im doing this for sure. Can I make these shims out of washers or something as long as they are 2mm and I assume the same OD and ID as the shafts, or should I order them in.

 

[402camaro]

The shims you are looking for are made by Yamaha and are about 3 buck each.

1.5 mm part no. 90201-222F4

0.5 mm part no. 90201-222F0

Put the 1.5mm shim in my 750 king, Its great. Most effective, cheap mod you can do.

 

[fastidle]

I did the 18 gram weights and the coop mod with 1.5mm shimm and the bottom end is better, little difference is better than nothing, Now Im back to or better than normal with small tires, Thanks guys