Can - HO vs R motor

[SLEDBUNNYRACING]

I have a 07 Summit 800 HO and a can for a 07 Summit 800 R.
Will it work or will it cause the sled to lose power.
Anyone know

 

[ioio]

I switched cans with my brothers 800R and couldn't tell the difference on my 800HO. No real testing, just going by feel on flat land.

 

[SLEDBUNNYRACING]

I switched cans with my brothers 800R and couldn't tell the difference on my 800HO. No real testing, just going by feel on flat land.

That's more insight than I had so I'm going to try it to see.

 

[tex78]

The pipe inside is different between the ho and r.

But the cans are the same.

from my HTC

 

[SLEDBUNNYRACING]

The pipe inside is different between the ho and r.

But the cans are the same.

from my HTC

By pipe do you mean backpresure that could have a negative effect?

 

[tex78]

No I mean the pipes are different.










The cans are the same.

from my HTC

 

[SLEDBUNNYRACING]

No I mean the pipes are different.










The cans are the same.

from my HTC

Slight difference but it all went together fine

 

[farmerboy]

The motor in an 07 is an 800R. The pipe is specific to 07and only an 07. The cans from 03.5 to 07 are the same. The pipes are the same from 03.5-06 800ho, thats why there are so many aftermarket options. I think SLP is the only company that has made an aftermarket pipe for the 07's but I may be mistaken. My Son had an 07 and they have the old Rev body style with the first year of the 800r motor

 

[SLEDBUNNYRACING]

Actually mine I an HO, there were a few released early that season (as shared by the Doo Boys when doing some work it) I thought the se and bought an 07 use can from Speciality Sleds only to find out later they it was an HO.

 

[farmerboy]

Actually mine I an HO, there were a few released early that season (as shared by the Doo Boys when doing some work it) I thought the se and bought an 07 use can from Speciality Sleds only to find out later they it was an HO.

WOW. I learned something today

 

[tex78]

Dunno.

Pretty sure if its a early 07 it would have a 800r as for testing ect.

Are u sure its not a 06. Mabe a left over 06 and sold in 07.

from my HTC

 

[SLEDBUNNYRACING]

Dunno.

Pretty sure if its a early 07 it would have a 800r as for testing ect.

Are u sure its not a 06. Mabe a left over 06 and sold in 07.

from my HTC

That was my thought as well but Martin Eq was the one that thought it was a wrong until they did the research.

 

[tex78]

What's the 10th digit of the vin.



from my HTC

 

[SLEDBUNNYRACING]

What's the 10th digit of the vin.



from my HTC

Will check when back in Edmonton

 

[gdhillon]

Slight difference but it all went together fine

not to thread jack but is that where the coolant is supposed to be at? On my rev I filled it to that top line (cold) and it seemed like the sled puked it up till it got to about the level your sled is at)

 

[tex78]

not to thread jack but is that where the coolant is supposed to be at? On my rev I filled it to that top line (cold) and it seemed like the sled puked it up till it got to about the level your sled is at)

U need a new coolant bottle.

The cap ovels the bottle and it won't seal to cap under psi.

I have changed many.

sent while I should be drinking twisted teas

 

[farmerboy]

07's were bad for bottles

 

[gdhillon]

ok is there a drain plug for the tank? do you guys change your house clamps to ? or do you just undo the worm clamps take the old tank out and replace with new?

 

[gdhillon]

07's were bad for bottles

mines an 06 HO, does anyone make a neck insert like the one for oil tank?