BMP Slick Shift Bearing

[_LB_]

Hey All,

I am installing the Cory Micku Steep and Deep Clutch kit on my 2012 XP right now and it came with the BMP Slick Shift bearing. The bad part is there is no direction as to where to install this bearing and since this is my first clutch kit install as well as shift assist install I was wondering if anyone has installed one of these in their machine if so where did the bearing kit go. Thanks

LB

 

[flabbajabba]

pretty sure it goes under the secondary spring away from the helix. (clutch side) you need a spring compressor to take the helix off its under alot of pressure.