Hey guys,I am having some issues with my grizzly 700.The 4x4 is disengaging when i jack it up and check,but it is not showing it is on the display.Was wondering if anyone would know whats going on with it by chance.
likely have a bent shift fork assenble however you cannot buy parts for them only either half of diff or entire thing if u split your diff their will be a pin which holds your shift fork that is peened in if u drill this u can remove the pin/shiftfork then straighten the slide assembly and have a piece of key stock welded in and drilled throgh the holes re install fork and pin , use a welder on diff housing for small spot weld to ensure pin stays in and re assemble dont be scared its not complicated have done this to a few of them as long as it hasnt done to much damage to the gears where they sync already