XanderKane
Active member
I did a track swap on my 2015, 155 pro last week to a 156x3 X3 and it seems like the track is still a little loose with only roughly 3/8" left on the adjustment bolt to tighten the track. I'd imagine it's going to stretch some as well. I read back 65+ pages and didn't really see anyone doing anything about this? I know an 8 inch wheel switch would give me roughly an inch of adjustment but read a thread by maxwell stating his billet wheels would collect ice and cause vibration issues.
Ice age sells a pushed back axle kit was was thinking that may be the route I go if it's recommended.
Also in reading about the anti stab kit I ordered a two wheel kit as some mentioned issues about the outside wheels coming off resulting in track damage. However in almost all the builds that I saw everyone was running the 4 inch kit. Should I order the outside wheel for the anti stab kit?
Ice age sells a pushed back axle kit was was thinking that may be the route I go if it's recommended.
Also in reading about the anti stab kit I ordered a two wheel kit as some mentioned issues about the outside wheels coming off resulting in track damage. However in almost all the builds that I saw everyone was running the 4 inch kit. Should I order the outside wheel for the anti stab kit?