2011 xp clutch alingment tool

[rotormech]

theres alot of these out there,any advise on the right one.2011 800 etec everest.

 

[snopro]

Probably can't go wrong with the BRP one........no?

 

[rotormech]

your probably right....

 

[snopro]

I don't remember what I payed for mine but I don't think it was that expensive.

 

[rotormech]

how far out was yours?i bought a 2011 800 everest etec,havent picked it up yet but, be nice to see if the clutches are out to start with,then a dj kit,vents and snow......

 

[snopro]

Mine were spot on but I know guys whose are out and had to shim the secondary. BRP is gonna have a kit available this fall that addresses the problem for people that have it.

 

[rotormech]

i havent had much expereince with the new xp secondary set up.i had a 04 rev,does the secondary come off the shaft at all?i see there is some bolots in behind,do those come out?

 

[snopro]

The secondary and the jackshaft all come out as a single unit. With a special tool you drive it out from the chaincase side. Once the unit is on the bench you can then do the disassembly of the secondary for service or tuning components.

 

[canam1221]

Hey i know this threads a little old but im brand new to sledding this year and picked up a 2011 etec and i am more of a do it myself kinda guy but i was just wondering how do you check how much your clutch is out?

 

[snopro]

You need an alignment bar for an xp or take it to your dealer.