2010 800 R bogging

Hillbilly64

Active VIP Member
Joined
Nov 17, 2008
Messages
151
Reaction score
96
Location
Athabasca
Just bought my son a 2010 Summit XP with the 800R engine.
when I picked it up it had lots of pull, now it will idle fine but as soon as you get on the throttle it Boggs down and is making no RPMs.
changed one bad plug cap and put in new plugs with no change.
any ideas?

thanks
 

mudpro9

Member
Joined
Feb 27, 2012
Messages
8
Reaction score
0
Location
Regina
Check over you clutching could be a bad bushing or a broken roller in your secondary. Or you might have a bad set of reeds.
 

SUMMIT TREE

Active VIP Member
Joined
Oct 20, 2012
Messages
2,099
Reaction score
8,469
Location
Bonnyville AB Canada
I just pulled my E Tec apart, because it was bogging bad and the reeds were toast. It's a lot of work but I would check them.
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,523
Reaction score
16,889
Location
DA Moose B.C
Check the dess teather is on all the way...

Will not let it rev up to grab the belt



sent while I should be drinking tea's
 

Hillbilly64

Active VIP Member
Joined
Nov 17, 2008
Messages
151
Reaction score
96
Location
Athabasca
Thanks guys. I checked the dess first and it's ok. Cleaned up the RAVE valves last night but haven't had time to give it a ride.
i guess the next step will be to pull the carbs and clean them up then the reeds. That's about the extent of my mechanical ability!!! Lol
 
Top Bottom