2004 VW Jetta TDI Timing Belt TOOL

[Ministik Man]

Live in Edmonton Have a 2004 VW Jetta TDI Timing Belt Install Tool Does anyone have this tool I can rent or borrow for 2 days..... Please reply or email me a brianbeebe@shaw.ca or call cell at 780-990-9339 2004 VW Jetta TDI Timing Belt TOOL

 

[tex78]

I'm an auto tech.

Wouldn't touch one of them with a 10 foot pole.

It's not worth a engine. Get it done at a pro shop.

Plz don't do it urself.

sent from A UNKNOWN PLACE IN TEA LAND

 

[Highfly]

I'm an auto tech.

Wouldn't touch one of them with a 10 foot pole.

It's not worth a engine. Get it done at a pro shop.

Plz don't do it urself.

sent from A UNKNOWN PLACE IN TEA LAND

You don't know VW owners very well do you. Check out . Many members are in the Edmonton area. Also look for the Air riders club in Edmonton. All great bunch of guys.

 

[tex78]

You don't know VW owners very well do you. Check out . Many members are in the Edmonton area. Also look for the Air riders club in Edmonton. All great bunch of guys.

But I'm trying to tell mystic man not to change the belt himself.

Cause I'm sure that's what he is doing.

sent from A UNKNOWN PLACE IN TEA LAND

 

[Catman10]

I just did my timing belt on my 03 tdi and I had no special tools and it was a piece of cake. I locked up my fuel pump pulley with the right size drill bit and the reast was easy. Go for it but I cannot speak for the 04 as it may be different.

 

[Dynamic]

I'm an auto tech.

Wouldn't touch one of them with a 10 foot pole.

It's not worth a engine. Get it done at a pro shop.

Plz don't do it urself.

sent from A UNKNOWN PLACE IN TEA LAND

Why waste your money when you can do it? It would of cost me 700 buck to have a shop to do my civic, I got 200 bucks worth of parts and did it myself. It sucked to do it but it wasn't complicated and my engine ran perfectly after. I am not an auto tech.

 

[Highfly]

But I'm trying to tell mystic man not to change the belt himself.

Cause I'm sure that's what he is doing.

sent from A UNKNOWN PLACE IN TEA LAND

I know you were just looking out for him. I was just teasing you. A lot of VW owners are hard cord "do it yourself" kinda guys. Will spend hours, days , weeks researching to save a buck . I am one of them ;-)

 

[tex78]

Civic is way different. I could do one of them with my eyes closed.



The vwv diesel is so touchy to do with 0 room for being one tooth off even turning the engine by hand. Can bend the valves.

sent from A UNKNOWN PLACE IN TEA LAND

 

[CUSO]

Isn't that what a straight edge and a sharpie is good for?

 

[Dynamic]

Civic is way different. I could do one of them with my eyes closed.



The vwv diesel is so touchy to do with 0 room for being one tooth off even turning the engine by hand. Can bend the valves.

sent from A UNKNOWN PLACE IN TEA LAND

I had the same stuff to watch for, my civic also has an interference engine and you can damage the valves just by turning the pulleys the wrong way. Putting a belt on with the timing marks in the right spot is a straight forward process. I'm sure the tdi jetta can't be that hard.

 

[tex78]

The compresion ratio is 2 times with the t.d.I.

Hence the more valve issues

sent from A UNKNOWN PLACE IN TEA LAND

 

[DRD]

Get the tooling.

A3 Timing Belt Change