molson_rules_70
Member
- Joined
- Oct 20, 2011
- Messages
- 16
- Reaction score
- 4
Hey guys, I ride my 03 edge around Beaumont AB, I am looking for some clutch tuning advice.
I run SLP single pipe, V-force 3 reeds, SLP boost bottle, Air Horn, team roller sec, SLP Black/Pink primary, SLP Red/Black secondary. in the mountains my machine rips at about 8100 RPm with Polaris 10-64 weights (7000 ft) and climbs awsome.
However around town I am only hitting 7800 and can't get my RPM's to peak nice with 10-66 weights. My sled gets up to speed real quick but does not seem to pull hard at full throttle. it feels soft and I have a feeling the polaris weights don't have enough tip weight to keep in the power band, possibly not enough shift rate (curvature) with the 10-66's.
I was thinking of following SLP's clutch recomendations of MTX weights but am not all that wild about the rivets spinning at 8000 RPM's anybody have experience with these weights or issues? Any suggestions or alternate weights that they have used that perform just as good or perform well with that engine set up?
looking to get my sled hitting that 8100 peak and ripping i know it can.
I run SLP single pipe, V-force 3 reeds, SLP boost bottle, Air Horn, team roller sec, SLP Black/Pink primary, SLP Red/Black secondary. in the mountains my machine rips at about 8100 RPm with Polaris 10-64 weights (7000 ft) and climbs awsome.
However around town I am only hitting 7800 and can't get my RPM's to peak nice with 10-66 weights. My sled gets up to speed real quick but does not seem to pull hard at full throttle. it feels soft and I have a feeling the polaris weights don't have enough tip weight to keep in the power band, possibly not enough shift rate (curvature) with the 10-66's.
I was thinking of following SLP's clutch recomendations of MTX weights but am not all that wild about the rivets spinning at 8000 RPM's anybody have experience with these weights or issues? Any suggestions or alternate weights that they have used that perform just as good or perform well with that engine set up?
looking to get my sled hitting that 8100 peak and ripping i know it can.