Bulldog Racing
Active member
Just bought a new 09 M1000 Sno Pro. The sled is bone stock for know, but soon to be modded. Took it out for its first ride, and when opening it up, on and off the throttle, it will pull up to 6250rpm and just stay there. Thought it might be a clutch hanging up, but should do it all the time if this is the case. Almost feels like the power valves aren't opening, but with the servo motor they should open automatically shouldn't they. Hate to sound dumb on here, but so used to aftermarket high performance stuff, haven't really worked on the new efi sleds. Always found it easier to work on carbs and old school stuff. Any input would be apprieciated.
I talked to a couple guys in Red Deer that have had the same problem, with no fix yet. They said they have swapped ECU's, and basically tried changing every electronic part on the sled, but still doing it. Any ideas?
I talked to a couple guys in Red Deer that have had the same problem, with no fix yet. They said they have swapped ECU's, and basically tried changing every electronic part on the sled, but still doing it. Any ideas?