easycat 1000
Member
I have a 07 m_1000 wih a complete SLP Single pipe, Boondocker Box, RK Tek secondary. I am running 68 gram weights with a Black / Red spring in the primary. A straight 36 with a Red / White Spring. Last spring all that I could pull was 7400 RPM. When I ran 70 gram weights in the primary, same thing thing 7400 RPM. I am now showing MAG inj Error on my boondocker box. Where should I start fixing. I checked the Box for loose wires, nothing there. Shold I keep weighting down or concentrate on the Box for failure. Please help, Thanks. SLP said to be in the 7500 - 7700 RPM range. Today I put the sled on blocks and I could pull 7500 RPM's with no load. Might it be in my secondary?
