07 800r knock sensor isolation?

[tothebar]

Just wondering if someone could tell me if it's smart to move the knock sensor from the engine to somwheres else on the sled, is this going to effect my timing or fuel in a negative way? I'm having some problems making the sled pull rpm and the engine light is on and was thinking if there was a way to eliminate the knock sensor it would help me to rule it out, any advise would b great!! Thanks.

 

[tex78]

Y would u move it. It needs to be in the middle of the 2 jugs... And close to where its going to ping-knock...Unless u like replacing pistons and cylinders....Mabe u don't have good gas or a head the has too much comp. Nota once did y 07 800r knock-engine light on

 

[tothebar]

Y would u move it. It needs to be in the middle of the 2 jugs... And close to where its going to ping-knock...Unless u like replacing pistons and cylinders....Mabe u don't have good gas or a head the has too much comp. Nota once did y 07 800r knock-engine light on

That doesn't really answer my question but thanks anyway...

 

[tex78]

Huh. It's has to be at the top and in the middle of the cylinders

 

[AreWeThereYet]

That doesn't really answer my question but thanks anyway...

If you're going to move it you might as well just cut the wire and throw it in the bush.