02 summit sway bar off

02 summit 700

Active member
Joined
Jun 4, 2011
Messages
74
Reaction score
6
Location
canada
well i just got back from the mtns and took of my sway bar and i road it on hard pack for about 5 min and its not that bad its abit easyer to lean it over but when i get it back in some pow will be the true test. there is a very easy way to get them out without cutting them off just incase u wanna put it back in. :cool:
 

the_real_wild1

Active VIP Member
Joined
Oct 13, 2010
Messages
6,966
Reaction score
7,389
Location
cardiff
I wish I had not cut mine out. Now that it is a spare sled I would rather it be in.
 

02 summit 700

Active member
Joined
Jun 4, 2011
Messages
74
Reaction score
6
Location
canada
all you have 2 do is drill out the rivets on the plastic shrouds and unbolt the ADSA arms at the back clip 2 zip tys off the sway bar on the inside and shimy it out.
 

Blecter

Active VIP Member
Joined
Aug 1, 2011
Messages
190
Reaction score
104
Location
Edmonton
all you have 2 do is drill out the rivets on the plastic shrouds and unbolt the ADSA arms at the back clip 2 zip tys off the sway bar on the inside and shimy it out.

This is how a lot of guys are doing it over on Dootalk. I was gonna do it this way, but in the end I just cut it out. Much happier with it out anyways.
 
Top Bottom