Sled deck on 1/2 ton?

Lem Lamb

Active VIP Member
Joined
Apr 5, 2010
Messages
3,667
Reaction score
6,654
Location
Lacombe AB
Add brick or fire wood betwee spring and frame,,, load heavy and go...

Turn rearview mirrors so we can't see anything behind you and pin it... Ha...

All flashing lights disappear when the tires get into the loose snow... win win for sure...
 

S.W.A.T.

Active VIP Member
Joined
Apr 13, 2008
Messages
4,429
Reaction score
7,618
Location
Smithers
Add brick or fire wood betwee spring and frame,,, load heavy and go...

Turn rearview mirrors so we can't see anything behind you and pin it... Ha...

All flashing lights disappear when the tires get into the loose snow... win win for sure...

Hockey pucks are the only way to go
 

Ballzdeep

Active VIP Member
Joined
Oct 12, 2017
Messages
1,967
Reaction score
6,860
Location
St Albert
Yeah they have a 5.5' box and terrible payload, like 600#'s


You must be new here. It's not ok to overload a 1/2 ton cause that means you're poor you can only overload lifted diesels cause then you're a baller.


According to SkiDoo and mud yes absolutely.

my 6.2 supercrew is 5.5 box 1,860lbs is my payload max. 2 sleds on aluminum deck and she was leveled. not lights ski high, just pure perfection:beer:
 

Ballzdeep

Active VIP Member
Joined
Oct 12, 2017
Messages
1,967
Reaction score
6,860
Location
St Albert
You were gonna post some pics so I could see your set up!
I will try to keep my jabber to a min. If you have any questions shoot me a pm. To get the front legs to fit in the 5.5 you need to do some trimming depending on you're deck. Only deck with adjustable legs to "properly" fit the 5.5 is Marlon. Would be easier if they made the front legs like they do the denalis or x deck and have one big front leg support instead of two front single legs. As you can see in the pictures the front left leg hits the curve in the box where the fuel neck shape is. That leg wouldn't sit flat until i moved it far enough forward to get past that hump in the box. Poor design from ford to lose some box space. To move that leg forward 2" to get it to sit flat i had to cut off the two front tabs on the legs and remove 2 out of the 6 bolts per leg for adjustment. Thoes tabs are just for tunbuckles, couldn't even get a tie down hook through them, the holes were so small, useless anyways. F150 box is deep too so i had them sitting on 2 2x6 boards to get it high enough.
IMG_0832.PNG IMG_0829.PNG
IMG_0831.PNG IMG_0830.PNG
IMG_0733.jpg
 

lilduke

Active VIP Member
Joined
Sep 15, 2009
Messages
17,530
Reaction score
62,328
Location
Local
They are sprung very light for the ride .
3-400 lbs is noticed . Lol
Air bags required if pulling anything or hauling .

i wouldn't buy it to haul a trailer. I like hauling ass down back roads. but just going to get some fox 2.5''s for the dodge.
 

pfi572

Active VIP Member
Joined
Mar 10, 2010
Messages
6,064
Reaction score
15,262
Location
Grande Prairie
Real good shocks make a world of difference, especially coupled with a good spring rate.

Exactly, takes more then just a good set of shocks as everything has to work together.
Tires and tire ply, rim size , tire size and weight , spring rates ,shock valving , truck weights , suspension travel and so on .
Good shocks do help for sure.
 
Top Bottom