Search results

So I have a 06 m7 with a D and D bb 800 kit on it, and it needs a rebuild both cylinders need a replate and I obviously going o do piston kits as well. My problem is what do i need for a gasket kit? Stock m7 ? the sled has the stock head still so I need factory O-rings I know. Thanks for any help

Just took the sled out again for the first time after tearing it down to check the reeds and power valves. I also turned the waste gate rod to lower my boost a bit. The reeds looked in great shape so I diddnt change them. Here's what I found on the test ride boost was running at 5psi and used...

Well I just took the reeds out to check them and they look just fine no feathering or cracking and they are seated against the cage well now im thinking its still a problem with my box settings . I will have to contact one of the professionals that were recommended tomorrow .

I could do that I guess but should the pump gas kit not be able to be set much lower than 8 psi on its own?

Right on thanks . I got some advise from a member here to check my reeds something I haven't done on this sled and should have before I got it running. I'm almost hoping that this is my main problem. Also I seem to be stuck at a minimum of 8 psi on my sled would I be able to lengthen the...

What elevation and fuel numbers is everyone running along with boost and fuel. And any other helpful touches

took the sled out again today this time with 100% av gas and about 8 psi of boost seemingly that's the lowest I can set it to with the boost T and I used the starting settings and tinkered a bit from there.I got it running not too bad the mid still had a sight bog tho then all of the sudden it...

Dam i defiantly didn't find that on the site but thank you very much for doing it for me !! I am very grateful I will test it out as soon as I can . If I am running 6 psi boost is it still a good idea to run mix gas/race fuel in this set up? It seems like there are too many mixed opinions on...

I emailed boondockers last night and have yet to get a response but I'm assuming they will get back to me during the week . All I can see on their website is install instructions for the kit and in them has basic understanding of how the box works but the only numbers I can find are 3000-...

I recently purchased a 2007 m8 with the boondocker pump gas kit on it. took the sled out today and it ran like a bag in the mid to top end just kept falling on its face and seemed to be over fueling like crazy. (plugs were soaked in oil.) im assuming the previous owner has messed with the box...