My 04 rev seems to have all its weight on the skis. At slow speeds or in the shop it is a good pull or push to move the handle bars. Everything is straight, greased, etc. I do have simmon skis ( double skagged ) but I believe it was tough with stock skis. I've switched from the stock cheapo...
I am going to swap tracks and was under the impression that I would need different drivers for the clearence. The pitch is the same, but stock drivers are 10 tooth. Would I need to go to 9 tooth or 8 even for the 3 tenths of an inch of track paddle difference?
Last winter, I had no spark so I replaced the plugs, coil, cdi box. I ran this sled last winter for a few hours and then parked it for the year. It fired up this year and ran fine. I went to use it a few weeks ago and no spark. I had another new coil in my toolbox. I put it on and it fired...
I was riding this last weekend and would notice my RPM's would drop 1000 to 1200 on a steep pull in the powder. It is very noticable and I don't remember this happening last year. I was told it was my clutch set up, but again don't remember this issue last year. I am running around 7800 and...
I have seen sleds with all of the idler wheels removed. I wonder if it is advisable to remove the front idler wheels closest to the limiter straps? Other than weight savings and looks, what would be the reason for this? Good idea? Bad idea?
New Boss Seat Stolen from my pick up truck at the West Edmonton Mall Inn parking lot. I had purchased this new seat from Specialty Sleds on saturday, and by sunday morning somebody had punched the lock on my passenger side door and took the seat. It was still in the box. What a thief would do...
Boss Seat Stolen from my pick up @ the West Edmonton Mall Inn parking lot. I had purchased it from Specialty Sleds on Saturday and by Sunday Morning somebody had punched the lock on the passenger door and took the seat. Still in the box. What a thief would do for a model specific sled seat I...
I have built a Mach Z for my daughter. It is a has a 670 and it's the mach z 800 chassis. I have a line on some crankshop pipes, they are from a 2003 summit x. Will these work for this sled?
I have a 2000 800 RMK. I've put the SLP can on this sled and it really woke up this machine. How much of a difference does switching the reeds do? Is this a mod worth doing? I've done the crank bearing upgrade and it's a fresh engine also. Any other things to do to this year of sled to...
After I washed my bike, it wouldn't start. It will backfire after a lot of kicking. I changed the fuel, plug, oil, airfilter, checked spark, checked fuel in the carb, checked for both valves moving up and down. It sounds like a timing problem, anybody know?