2015 high lifter. When I slow down rapidly, the secondary does not back shift fast enough. If you stop totally you have a hard time getting started because the belt is high in the clutch. If you are still rolling slowly you can feel the belt going back into place. I have a new Polaris belt. Every thing has been cleaned up and inspected. 75 miles on machine . Perhaps a weak spring ?
Rzr 1000 secondary issues.
- Thread starter stonycat
- Start date
ABMax24
Active VIP Member
More likely broken than weak, or could be a bad roller or dirt in it. Only way to know is to pull the cover off and have a look at it.
- Thread starter
- #3
ABMax24
Active VIP Member
Does it pull full RPM at full throttle? If it does it's not a weak spring, likely something binding in the clutch. How about the Primary Clutch? all rollers and weight bushing look good in it?
- Thread starter
- #5
- Thread starter
- #6
Found the problem. Trying to trouble shoot it driving on the road with no clutch cover, Primary fell apart. Ended up passing me on the road. Earlier dealer assured me he has never had lock nut loosen off. I will discuss it with him tomorrow. Lol
Similar threads
