M series Service Manual

FernieHawk

Active VIP Member
Joined
Dec 1, 2008
Messages
1,965
Reaction score
5,563
Location
Fernie, BC
I'm looking for a service manual for a 2008 M1000.

Doing a motor swap between two sleds...good motor from a bad chassis to a good chassis with a blown motor.

Taking the blown motor out of the good chassis was a pain in the rear and I figure there must be a better way than the way i did it, I would like to gather some more info before removing the good motor. I will be doing an oil injection delete during the motor swap, so the oil reservoir will not be an issue.

Any advice would be appreciated.
 

FernieHawk

Active VIP Member
Joined
Dec 1, 2008
Messages
1,965
Reaction score
5,563
Location
Fernie, BC
Last edited:

rebel

Active VIP Member
Joined
Aug 25, 2008
Messages
30,726
Reaction score
50,584
Location
JNP
Were there many changes from 07 to 08? I have the 07 service manual on disc if it Will help you out.
 

FernieHawk

Active VIP Member
Joined
Dec 1, 2008
Messages
1,965
Reaction score
5,563
Location
Fernie, BC
Were there many changes from 07 to 08? I have the 07 service manual on disc if it Will help you out.

Thanks...I'll let you know if the PDF file transfer doesn't work out.

Cheers
 

FernieHawk

Active VIP Member
Joined
Dec 1, 2008
Messages
1,965
Reaction score
5,563
Location
Fernie, BC
apex88 was nice enough to send me a Service Manual, so I've got that covered now.

If anybody knows some motor removal tricks and would like to school me...that would be great.

Ive read online that you should pull the motor with the injectors still attached...but if you don't take the injectors off...you cant get to the lower motor mount. tried to get to the lower mount from the bottom, but there's not enough clearance to get a wrench on.
 

thriller

Member
Joined
Oct 5, 2007
Messages
24
Reaction score
2
Location
Sparwood BC
I know this is a super old thread but does anyone still have the maintenance manual for the 07 m series? thanks in advance.
 
Top Bottom