WANTED 2019 2020 850 Jackshaft

pfi572

Active VIP Member
Joined
Mar 10, 2010
Messages
6,064
Reaction score
15,264
Location
Grande Prairie
The sled is a completely stock 2020.5 850T 1200 Kms will get back to the sled this upcoming week and get some pics posted

e79bf5be09b21bb07d71562c664fd5a1.jpeg

5c62c278b6a36963c2a46a80434cb254.jpeg
 

turboetech

Active VIP Member
Joined
Nov 8, 2011
Messages
901
Reaction score
1,358
Location
Alberta
Its hard to see in the pics but the parallel break was rusty which would make one think it had been cracked for some time thx pfi572 for posting the pics
 

turboetech

Active VIP Member
Joined
Nov 8, 2011
Messages
901
Reaction score
1,358
Location
Alberta
Something else to note when it broke I was on a climb at 8000rpm and checked the max rpm on the display and she sang at 8900rpm...yikes
 

pfi572

Active VIP Member
Joined
Mar 10, 2010
Messages
6,064
Reaction score
15,264
Location
Grande Prairie
Something else to note when it broke I was on a climb at 8000rpm and checked the max rpm on the display and she sang at 8900rpm...yikes

Hmmmm
I thought they had rev limiters ?
That will have been noted I hope ? Over RPM for possibly warranty down the trail .
 
Last edited:

turboetech

Active VIP Member
Joined
Nov 8, 2011
Messages
901
Reaction score
1,358
Location
Alberta
Yes all that data will be stored in ecm with time and date stamps.....I think the rev limiter kick in around 8450rpm but 8900 was locked on display as high rpm of the day....took about 5 seconds to kill motor after I hit the kill switch so I knew it seen record breaking high rpms
 
Top Bottom