TPMS issues

johndeereman346

Active VIP Member
Joined
Jul 5, 2008
Messages
754
Reaction score
0
Location
The cot in my job trailer
So i hop in my truck and the tire pressure sensor light is on in my truck, then i scroll through the srceen and it says my one tire is at 95 psi (weird) then i rolld down the road and it comes up and says its at 7 psi (weirder). now at this point im interested so i get out and get the tire gauge and check 57 psi (where i set it this spring) now im really confused so my questions is to any techs that may have delt with this or have an idea of its solution.
 

slomo

Active VIP Member
Joined
Feb 8, 2007
Messages
809
Reaction score
123
Location
in my garage
moisture in the sensor causing abnormal readings,but i find usually doing a tpm relearn usually clears this up
 

mb1

Active VIP Member
Joined
Oct 26, 2007
Messages
777
Reaction score
153
Location
Edmonton
You might do a search on dieselplace.com, there are a bunch of threads on TPMS, I just haven't paid any attention to them cause I don't have them.
 

Scuba

Active VIP Member
Joined
Oct 9, 2008
Messages
1,221
Reaction score
105
Location
Fort Mcmurray
talk to SLEDJED on this site he knows all about them, he had issues with his.
 

slomo

Active VIP Member
Joined
Feb 8, 2007
Messages
809
Reaction score
123
Location
in my garage
like i said preform a tpm relearn as i do to the ones that come into our dealer
you can place the vehical into learn mode from the dic and if you do not have that option turn the ign on press and hold the lock and unlock buttons
at the same time,this will honk the horn twice,then start at the lf tire and let air out or inflate intill you hear anouther horn chirp and adjust the pressure
after that move to the rf then rr then lr repeating all the steps as mentioned
then drive the vehical and your good to go.unless you have access to a tpm
relearn tool or a close by stealership
 

johndeereman346

Active VIP Member
Joined
Jul 5, 2008
Messages
754
Reaction score
0
Location
The cot in my job trailer
like i said preform a tpm relearn as i do to the ones that come into our dealer
you can place the vehical into learn mode from the dic and if you do not have that option turn the ign on press and hold the lock and unlock buttons
at the same time,this will honk the horn twice,then start at the lf tire and let air out or inflate intill you hear anouther horn chirp and adjust the pressure
after that move to the rf then rr then lr repeating all the steps as mentioned
then drive the vehical and your good to go.unless you have access to a tpm
relearn tool or a close by stealership

Tried that before im gonna try again
 
Top Bottom