GreyGhost
Active VIP Member
Hello everyone. Figured since I just finished putting the doo race hood on my summit I’d post some pictures along with the part numbers. Since no ones really covered it. Ill start with the part numbers. Hood assembly-517307920 (x1), panel nut-250000958 (x3), hook for gauge mount-517306967 (x2), torx screw-250000577 (x8), hood slide in hook-517307050 (x4), intake hose-508001018 (x1), hose clamp-293650054 (x1), boot (aka stainless ring)-508001019 (x1), and the frogskinz vent covers-508001030, 508001043, 508001029, 508001042. Now I didn’t use the four hooks doo calls for (part number 517307050 because it was $200 for them) and just ended up making them out of plastic that I had at my shop. The swap is really easy and just bolts up. You will need to remove the top two hooks for the side panels and the mass air flow sensor and relocate it to the new hood. You will have to remove two rubber grommets from the bottom of the gauge cluster as the two aluminium hooks won’t fit with them in. I should also mention that it helps to rivet the two aluminum hooks to the hood. Hopefully this helps!!
Last edited: