Replacing mag side engine support on a rev

[MGD]

wondering if there is a way to do it with out removing the front heat exchanger,
looks like if you rivet it from the support side the rivet ends may rub on the
exchanger. thanks for any input.

 

[lshobie]

Are you taling about the thin aluminum strip on the side of the chassis that is riveted on? If so then buy the 440 race chassis support and bolt it in.

 

[AkNomad]

I think he's talking about the black support that goes under the engine that the motor mount bolts too. I think the cooler sits above the engine mount in question, I just had my engine out of my sled and as far as I can tell you should be able to rivet it without removing the cooler.