Random Turbo Stuff

[skegpro]

Are these little hose barbs normal or did they splice the hose.

Trust it?

 

[skegpro]

Any tricks for fixing these?

 

[skegpro]

So much foam. View attachment 248763

 

[skegpro]

.........

 

[maxwell]

thats neat, pretty sure mine didnt look like that but ill have to check. i would have left the foam, makes it quiet, no rattles, and the panels dont rub when sidhilling harder snow. they collect a bit of moisture but nothing measurable

 

[snoflake]

Pretty sure the foam is for noise dampening. The air vent kink, I've seen before & not sure if you can massage it out.

 

[snopro]

I shortened that hose an inch I think last year and took the kinks out

 

[Dawizman]

One thing I can tell you, don't hit those frogzskin with a heat gun. Tried that to iron one out on my wife's sled, and it melted in a hurry.

 

[niner]

Any tricks for fixing these? View attachment 248762

You could try squeezing in some liquid nail or other wicked glue and clamp it or weigh it down.

 

[skegpro]

thats neat, pretty sure mine didnt look like that but ill have to check. i would have left the foam, makes it quiet, no rattles, and the panels dont rub when sidhilling harder snow. they collect a bit of moisture but nothing measurable

This piece of foam is massive, stuck it to my toolbox should weigh it.

Baby steps, leaving the stock can this year. Next year I might touch nothing..

 

[skegpro]

Gonna try an Ultimax, have heard good things. See how it goes.

 

[maxwell]

Gonna try an Ultimax, have heard good things. See how it goes. View attachment 248770

Why not run the belt that came on it? Use that as a spare? We’re getting like 1800-2000km on the factory belt

Or at least start with the stock one for a baseline and then switch to that one to see if theres a difference. From my experience aftermarket belts cause all sorts of issues

 

[skegpro]

Why not run the belt that came on it? Use that as a spare? We’re getting like 1800-2000km on the factory belt

Funny as it sounds dealer was out of belts. So they sold me this.

$150, and 1 yr warranty.
BRP belts are $270 list now.

Have a few BRP belts Left over from last year, plus the one that came on it.

 

[skegpro]

Second year running the mainway solutions t-motion delete.
Missed it on the first ride.

 

[skegpro]

...........

 

[skegpro]

So slobbery

 

[snopro]

So slobbery View attachment 248778

They all
Do that till the doughnut seats in

 

[snoflake]

Why not run the belt that came on it? Use that as a spare? We’re getting like 1800-2000km on the factory belt

Or at least start with the stock one for a baseline and then switch to that one to see if theres a difference. From my experience aftermarket belts cause all sorts of issues

What kind of issues can a aftermarket belt cause.

 

[rknight111]

Why not run the belt that came on it? Use that as a spare? We’re getting like 1800-2000km on the factory belt

Or at least start with the stock one for a baseline and then switch to that one to see if theres a difference. From my experience aftermarket belts cause all sorts of issues

Ooh, Guess I should change my belt, I have 2800 km on it.

 

[skegpro]

They all
Do that till the doughnut seats in

I thought this plastic gasket was supposed to seal it.

Should a guy yank the donut and prime with high temp silicone?