Need Help with Aftermarket Rims Fitment

1200

Active VIP Member
Joined
Nov 11, 2010
Messages
542
Reaction score
615
Location
k town
One more thing to keep in mind is these cheap aftermarket rims can crack if u load your truck heavy. Seen it
 

snopro

Active VIP Member
Joined
Mar 3, 2009
Messages
107,957
Reaction score
103,729
Location
Milo,Alberta
Its not worked hard really. Pulls a 36' fifth wheel holiday trailer in the summer and a 24' snowmobile trailer in the winter. It does a lot of highway driving.
 

snopro

Active VIP Member
Joined
Mar 3, 2009
Messages
107,957
Reaction score
103,729
Location
Milo,Alberta
I’ve seen stock rims that have cracked.
I can see it for farm use where guys are carrying two round bales over rough frozen ground or oilfield where trucks are loaded down and bouncing over muskeg or rough rutted back roads
 

zal

Active VIP Member
Joined
Jan 11, 2009
Messages
2,441
Reaction score
7,792
Location
Northern AB & BC
TBH, the rims never looked abused really. No massive dents or rocks jammed. They were all a hairline crack from the inside of the bead towards the center. And about an inch long. Looked like there was a bad batch of aluminum rims at one time.
 

Superduty_17

New member
Joined
Dec 31, 2018
Messages
2
Reaction score
6
Location
Grande Cache
On all the super duties I have had I run 20x9 +20mm offset this is very close to factory. With 35x12.50x20 tires they sit out maybe a inch, so if you dropped down a tire size they would sit flush.
 

lilduke

Active VIP Member
Joined
Sep 15, 2009
Messages
19,140
Reaction score
68,005
Location
Local
I think i spotted snowpro and his new wheels


maxresdefault.jpg
 

2kDoo

Active VIP Member
Joined
Jul 23, 2012
Messages
2,460
Reaction score
4,631
Location
s
once mounted that wont look too bad at all actually !!
 

lilduke

Active VIP Member
Joined
Sep 15, 2009
Messages
19,140
Reaction score
68,005
Location
Local
riight...
once they are mounted to the truck and not sitting beside another wheel ? lol
I think they are just spaced out that far, but could be wrong. Hard to tell.
 

2kDoo

Active VIP Member
Joined
Jul 23, 2012
Messages
2,460
Reaction score
4,631
Location
s
I think they are just spaced out that far, but could be wrong. Hard to tell.
it's very easy to tell; there is smaller/different tread pattern beside a set of new MT haha
 

Trukker

Active VIP Member
Joined
Dec 16, 2008
Messages
899
Reaction score
1,711
Location
High River
Kenny try Gertz Wheels in Ponoka . They're on facebook and supposed to have some pretty good deals
 
Top Bottom