landing date of 2022 rmk matrix

jhurkot

Active VIP Member
Joined
Nov 2, 2008
Messages
2,391
Reaction score
7,873
Location
Monarch, AB
Same oil tank as the axys tight snug if you tighten any harder it cross threads and leaks.

It’s a different oil tank than the Axys. I don’t think I over tightened the cap it looked level in the tank. I think my whole oil tank needs to get replaced.
 

jrusher

Active VIP Member
Joined
Jun 6, 2008
Messages
228
Reaction score
405
Location
Edmonton
Day 1 oil tank leaking top and bottom.
Day 2 sled randomly shuts off and won’t idle.
D

Day 1 oil tank leaking top and bottom.
Day 2 sled randomly shuts off and won’t idle.
Definitely keeping my skidoo.
Keep us posted on the shutting off and oil tank issue.. Im heading out later this week to break mine in
 

OnlyPolaris

Active VIP Member
Joined
Apr 28, 2008
Messages
1,925
Reaction score
452
Location
Lloydminster, AB
check out the inserts for the oil tank neck. after a while the neck and threads get distorted and will leak. the insert will keep everything nice and round. have never had leaking issues after I started using them. I know yours is new and shouldn't be leaking but even with a new tank it will eventually start to leak down the road. spend the $20 on the insert and save the headache.
 

jrusher

Active VIP Member
Joined
Jun 6, 2008
Messages
228
Reaction score
405
Location
Edmonton
Put 200 km on my slash over the weekend . So far so good, sled works awesome super happy with it
 

Attachments

  • 45557115-20A4-4F7E-B12F-329A780BA2F1.jpeg
    45557115-20A4-4F7E-B12F-329A780BA2F1.jpeg
    297 KB · Views: 135
Last edited:

Jorgy

Active VIP Member
Joined
Nov 26, 2013
Messages
797
Reaction score
1,604
Location
Leduc County
My dealer called Friday said one of mine is in Canada and should be here in a week.
Have you gotten the shipped email? I got an email on the 3rd that my sled shipped from roseau on the 24th. Hasn't showed up at the dealership yet
 

Got boost want snow

Active VIP Member
Joined
Aug 16, 2010
Messages
1,082
Reaction score
1,871
Location
Alberta
I picked mine up last Friday (not boost). Heading out tomorrow to start break in. Hopefully as reliable as my Yamaha’s were (hahaha)
 

snochuk

Active VIP Member
Joined
Nov 9, 2006
Messages
5,366
Reaction score
15,423
Location
Edmonton
So in other words...............just send it as you see fit. ;)
That is how I break in every 2 stroke.
Bring them up to temp, then 1/4 throttle for a couple minutes to heat everything evenly
........ then giver!

This will be the first Polaris motor I try it on, when it arrives....................
 

drew562

Active VIP Member
Joined
Mar 13, 2008
Messages
2,916
Reaction score
9,710
Location
edmonton
That is how I break in every 2 stroke.
Bring them up to temp, then 1/4 throttle for a couple minutes to heat everything evenly
........ then giver!

This will be the first Polaris motor I try it on, when it arrives....................
We raced ice oval as kids. Dad also raced drag cars and had a performance garage. In the 70s. He always told me 2 cold starts. Rum new motor to get it warm and up to temperature. Shut it off let it cool. Then fire it up and giver.
 

snopro

Active VIP Member
Joined
Mar 3, 2009
Messages
80,001
Reaction score
60,452
Location
Milo,Alberta
We raced ice oval as kids. Dad also raced drag cars and had a performance garage. In the 70s. He always told me 2 cold starts. Rum new motor to get it warm and up to temperature. Shut it off let it cool. Then fire it up and giver.
You ever race in the old NWSA Drew?
 

drew562

Active VIP Member
Joined
Mar 13, 2008
Messages
2,916
Reaction score
9,710
Location
edmonton
I Did so. Against team deckers. Tomy’s. and those guys.
in the late 70’s and 80’s
 

snopro

Active VIP Member
Joined
Mar 3, 2009
Messages
80,001
Reaction score
60,452
Location
Milo,Alberta
I Did so. Against team deckers. Tomy’s. and those guys.
in the late 70’s and 80’s
Cool! I was in the NWSA from 80-90. Never raced the Deckers in Alberta but down at Eagle. Know the Tomeys well. I raced against Bratco, Bensons, Dohei and Liba’s. What classes you run?
 

snopro

Active VIP Member
Joined
Mar 3, 2009
Messages
80,001
Reaction score
60,452
Location
Milo,Alberta
How about Gord MacDonald, did you race him at Eagle River?
Not that I remember. Is he the son of the BRP dealer who works for BRP Matt? I have heard of him if he is. The 2 times is was there I raced the Sprint 540 class and the second time was Formula 1 with my twin tracker. What class did he race?
 
Top Bottom